Our bestseller
RMT-050B-4N cutting mechanism / 4-knife roller chipper
In a set
Cutting mechanism for chipper with 4 knives / RMT-050B-4N
Model: RMT-050B-4N
The subject of sale is a solid RMT-050B-4N cutting mechanism with 4 knives - intended for the construction of a chipper driven by a pulley or from a tractor through a PTO shaft. The set is based on a solid and durable housing with built-in 6308 type bearings, has an output for a 40B type auger with a diameter of 40mm, an output for a 35mm diameter pulley and a 10mm wedge, additionally secured with a seger and an output for a standard power transmission shaft used in agricultural tractors, i.e. 6 teeth, 1 and 3/8 inch. The cutting mechanism can be additionally equipped with a pulley / flywheel and a wood auger (with a replaceable pin tip) with a diameter of 100mm. The cutting mechanism is designed to cut wood with a maximum diameter of 5 cm.
The presented set has been developed on the basis of many years of experience and made entirely in our company from high-quality materials, using modern numerical machines and technologies - which guarantees failure-free operation for many years.
What are the advantages of our product:
What are the advantages of our product:
- The structure is based on welded steel sheet with a thickness of 10mm,
- Hardened cutting knives made of HARDOX steel.
- We offer the highest quality products with a written 24-month warranty!
- All parts are made in our company by POLISH employees under strict quality control - by purchasing our set you support the Polish economy.
- Very good value for money.
- Thousands of satisfied customers WORLDWIDE!
TECHNICAL DATA
Cutting mechanism:
- Max. cutting diameter: 55mm
- Cutting length (4 knives): 5-10 cm
- Cutting length (2 knives): 10-25cm
- Recommended power: 15KM
- HARDOX wear resistant steel knives
- Knife clearance at the base: 0.2mm
- Bearings used: 6308ZZ
- Bearing housing: STEEL !!
- Exit for the pulley / flywheel: 35mm
- PTO output: 6 tines, 1 and 3/8 inch
- Auger output: 40mm
- Case thickness: 10mm
- Housing base: 250mm x 200mm
- Housing base - hole spacing: 230mm x 160mm
- Housing base - hole diameter: fi 13mm
- PTO shaft guard
Use with a mechanical clutch: 800Nm or less
Warranty 24 months
For our products we grant
24 MONTH WARRANTY !
Ask a question
Write your opinion