Screw log splitter 80mm for tractor / kit ZW2U-080K2
Screw log splitter 80mm for tractor / kit ZW2U-080K2
LOG SPLITTER / SCREW WOOD SPLITER 80mm for tractor (PTO)
Model: ZW2U-080K2
Kit ZW2U-080K2 is designed for the construction of screw log splitter powered from tractor through the power transfer shaft PTO. The kit is based on two self-aligning bearings type UCP207, the cone is attached to the shaft with output type 35A with 35mm diameter, kit has an output for standard power transfer shaft used in agricultural tractors, 6 teeth, 1 and 3/8 inch. The kit comes with auger for wood (with replaceable tip locked by pin) with 80mm diameter which is commonly used for the construction of a typical log splitters for home use. Set containing this cone is the best solution for more demanding customers splitting large blocks of wood with a diameter more to 30cm. For this cone you can buy a cap increasing its diameter to 125mm or 150mm. Cone is equipped with a replaceable tip which is secured by a solid pin, so that the tip will not fall out when changing rotation on the contrary.
TECHNICAL DATA
Auger with replaceable tip (dowels):
[S080K2-35A]
- Grade of material: experimentally chosen chrome steel with high-strength
- PROPERLY HARDENED TIP - which guarantees its high durability and longevity
- Auger diameter: 80mm
- The length of the auger: 230mm
- The length of the working part: 175mm
- The diameter of the hole for the shaft: 35mm
- Mounting the auger on shaft: two screws M12, which ensures correct operation in both directions
- A deep left-hand thread of the auger with a sharp shape ensures easy screwdriving in wood
- The tip is blocked by pin with 12mm diameter!, making the connection very strong
- Recommended auger speed: 400-600 rev/min
COMPONENTS OF THE AUGER:
The auger body (1):
[K-S080K2-35A]
- The length of the body: 140mm
- The length of the working part of the body: 85mm
- Mounting exchangeable tip: spring pin 12mm!!
Exchangeable tip:
[SWK2]
- Grade of material: experimentally chosen chrome steel with high-strength
- PROPERLY HARDENED TIP - which guarantees its high durability and longevity
- The length of the tip: 115mm
- The length of the working part of the tip: 90mm
- Mounting in body: spring pin 12mm!!
- Tips are available in the continuous sale
Base kit:
[ZW2U]
Self-aligning bearing:
[UCP207]
- The diameter of the hole for the shaft: 35mm
- Bearing height: 93mm
- Base - width: 48mm
- Base - Length: 167mm
- Base - height: 47,6mm
- Base - hole spacing: 127mm (adjustable 3mm)
- Base - diameter of the holes: fi 17mm
Shaft:
[WW2U]
- Grade of material: experimentally chosen chrome steel with high-strength
- The length of the shaft: 370mm
- The diameter for the bearings: fi 35mm
- The diameter for the auger: fi 35mm
- Holes for the auger mounting screws: 2x fi 12mm
- Output for PTO: 6 teeth, 1 and 3/8 inch
FREQUENTLY ASKED QUESTIONS
Brand
Symbol
ZW2U-080K2
Producer code
5907532401006
Warranty
Auger type
with replaceable tip (pinned)
Auger diameterMore
The outer diameter of the auger measured in mm.
80mm
Kit type
for tractor
Kit version
LIGHT
Warranty 24 months
Ask a question
Not confirmed by purchase
Score: /5
Write your opinion
